-
产品中心
-
家电方案
-
主控显示单片机
- G1 (Cortex-M0+, Basic)
- G2 (Cortex-M0+, up to 48MHz)
- G3 (Cortex-M0+, 48MHz, USB option)
- G5 (Cortex-M3, up to 75MHz)
- M (Cortex-M0+/M3/M4F, High-Performance)
- L1 (Cortex-M0+, 低功耗)
- L2 (Cortex-M0+, 低功耗)
- 8位 Gx
- L1 (M8051, 低功耗)
- S1 (Cortex-M0+, up to 32MHz)
- L7 (Cortex-M4F, 低功耗)
- C1 (Cortex-M0+, Value)
- G4 (Cortex-M4F, 高性能)
- 马达方案
- 触摸方案
-
主控显示单片机
- 马达方案
- 传感器方案
- 电源方案
- 烟感方案
- 遥控器方案
- 32位单片机
- 8位单片机
- 旧版单片机
- 逻辑芯片
By Application
By CPU
-
家电方案
- 应用方案
- 支持和开发工具
- 关于我们
StarterKit-A96G198KN2N
StarterKit_A96G198KN2N 支持用户利用 A96G198 系列产品开发各种应用.
基于A96G198 MCU，包含了 LED, 按钮, 内置调试用的 E-OCD Ⅱ接口及 USB 接口.
Features
• 8-bit CISC Core (M8051EW, 2clock/cycle)
• 32KB Flash
• 768B SRAM
• 16-bit H/W CRC/Checksum
• 16-bit Timer X 5
• BIT 8-bit X 1
• 8-bit WDT 1 X 1
• UART X 2
• BUZZER X 1
• 12-bit ADC
• Internal 16Mhz RC oscillator
• On chip debug and ISP
• 32-LQFP
• 32KB Flash
• 768B SRAM
• 16-bit H/W CRC/Checksum
• 16-bit Timer X 5
• BIT 8-bit X 1
• 8-bit WDT 1 X 1
• UART X 2
• BUZZER X 1
• 12-bit ADC
• Internal 16Mhz RC oscillator
• On chip debug and ISP
• 32-LQFP
Getting Started
• Install the driver of OCD or OCD II on PC
• Check jumper position on Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check whether the PC recognizes the USB device normally from the Device Manager (Device should be recognized as OCD or OCD II or as HID device)
• Create source code projects and compile
• Download execution code to Starter Kit by using dedicated downloader or debugger
• Press reset button from Starter Kit or click run button of debugger
** The OCD or OCD II driver; demo software and example codes of Starter Kit can be downloaded from ABOV website
• Check jumper position on Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check whether the PC recognizes the USB device normally from the Device Manager (Device should be recognized as OCD or OCD II or as HID device)
• Create source code projects and compile
• Download execution code to Starter Kit by using dedicated downloader or debugger
• Press reset button from Starter Kit or click run button of debugger
** The OCD or OCD II driver; demo software and example codes of Starter Kit can be downloaded from ABOV website
System Requirements
• Windows PC (XP, Vista, 7, 8, 10)
• Micro USB Cable
• Micro USB Cable
Support Tools
E-OCD II
* 需要更多有关产品的信息，请联系：sales_cn@abov.co.kr
TOP
Authentication
Network Services
ABOV Semiconductor Co. Ltd. COPYRIGHT 2021 ABOV Semiconductor Co., Ltd. ALL RIGHTS RESERVED.