-
产品中心
-
家电方案
-
主控显示单片机
- G1 (Cortex-M0+, Basic)
- G2 (Cortex-M0+, up to 48MHz)
- G3 (Cortex-M0+, 48MHz, USB option)
- G5 (Cortex-M3, up to 75MHz)
- M (Cortex-M0+/M3/M4F, High-Performance)
- L1 (Cortex-M0+, 低功耗)
- L2 (Cortex-M0+, 低功耗)
- 8位 Gx
- L1 (M8051, 低功耗)
- S1 (Cortex-M0+, up to 32MHz)
- L7 (Cortex-M4F, 低功耗)
- C1 (Cortex-M0+, Value)
- G4 (Cortex-M4F, 高性能)
- 马达方案
- 触摸方案
-
主控显示单片机
- 马达方案
- 传感器方案
- 电源方案
- 烟感方案
- 遥控器方案
- 32位单片机
- 8位单片机
- 旧版单片机
- 逻辑芯片
By Application
By CPU
-
家电方案
- 应用方案
- 支持和开发工具
- 关于我们
StarterKit-A31G324RLN
Starter Kit_A31G324RLN支持用户利用 A31G32x (A31G324, A31G323) 系列产品开发各种应用.
基于A31G32x MCU，包含了 LED, 按钮, 内置调试用的 A-Link 接口及 USB 接口.
Features
• ARM Cortex®-M0+ 48MHz
• Ext. Crystal 16MHz in Starter Kit
• PLL (Up to 144MHz)
• 128KB Flash
• 16KB SRAM
• USB 2.0 FS Device
• Power Down Mode (Stop, Standby, Backup)
• 16-bit Timer/ 32-bit Timer
• 16-bit 3-phase PWM
• 12-bit 1Msps ADC & 10-bit DAC
• Comparator with internal Vref
• Watch Dog Timer / Watch Timer
• USART x 4
• I2C x 2, SPI x 2
• SWD Debug Interface
• Input (Reset, User SW) Button X 2
• 64-LQFP, 10x10mm
• Ext. Crystal 16MHz in Starter Kit
• PLL (Up to 144MHz)
• 128KB Flash
• 16KB SRAM
• USB 2.0 FS Device
• Power Down Mode (Stop, Standby, Backup)
• 16-bit Timer/ 32-bit Timer
• 16-bit 3-phase PWM
• 12-bit 1Msps ADC & 10-bit DAC
• Comparator with internal Vref
• Watch Dog Timer / Watch Timer
• USART x 4
• I2C x 2, SPI x 2
• SWD Debug Interface
• Input (Reset, User SW) Button X 2
• 64-LQFP, 10x10mm
Getting Started
• Check jumper position on the Starter Kit
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP
(ABOV A-Link/A-Link Pro PC GUI only supports download)
• Write code and compile
• Download using Keil ULINK2, A-Link/A-Link Pro Debugger
• Press Reset Switch
• Check program operation (KEIL, IAR, Eclipse IDE supports debug)
• The demo software and example codes to use the features are available on ABOV website
• Connect the Starter Kit to PC via USB cable
• Check connection from Keil MDK-ARM, IAR EWARM to CMSIS-DAP
(ABOV A-Link/A-Link Pro PC GUI only supports download)
• Write code and compile
• Download using Keil ULINK2, A-Link/A-Link Pro Debugger
• Press Reset Switch
• Check program operation (KEIL, IAR, Eclipse IDE supports debug)
• The demo software and example codes to use the features are available on ABOV website
System Requirements
• Windows OS (XP, Vista, 7, 8, 10)
• Micro USB Cable
• Micro USB Cable
Development Tools
- KEIL MDK ARM
- IAR EWARM
- IAR EWARM
Support Tools
- A-Link
- A-Link Pro
- A-Link Pro
* 需要更多有关产品的信息，请联系：sales_cn@abov.co.kr
TOP
Authentication
Network Services
ABOV Semiconductor Co. Ltd. COPYRIGHT 2021 ABOV Semiconductor Co., Ltd. ALL RIGHTS RESERVED.